Considering Solar PV Training In The UK

In a nutshell, ’Green Energy’ utilises natural resources such as sunlight, wind, tides and geothermal heat to provide our daily energy requirement. When ’Green’, they are all thought to be replenishable and natural. Often, by going back in time, we can see the value of wind power and windmills as modern energy sources. Regardless of this, we are mainly talking about using modern techniques to offer planet friendly and eco-efficient solutions.

The range of renewable energy technologies utilised within the home environment includes both Solar Thermal, and Solar Water Heating Collectors. It is equipment such as Photovoltaic Panels (PV’s) that develop electricity through suitable roof-panels. Then there are Stoves that burn Bio-Pellets – which make up the subject commonly known as Biomass Energy. Then we have the ancient energy of the Sun and the heat that comes from it – now called Ground Source Heat Pumps. Lastly, there are two of the more historical forms of energy production – namely Wind Turbines and Hydropower.

Thermal Solar Energy Systems: Typically referred to as Solar Energy this is mainly made up of two types of Solar Panels – each using different methods to achieve similar results. To begin with, we have the concept of drawing energy from the Sun to heat water – known as Solar Water Heating Collectors. Additionally, there is the method of converting solar radiation into electricity known as Photovoltaic – or simply Solar Electrical panels. Solar Panels themselves need to be away from all light blocks, and should be on south facing roofs at angles of 30 degrees from the horizontal plane.

Within this discipline, Solar Water Power is often regarded as the most popular form of Solar Energy within the UK. These systems are very efficient – and can deliver 50 percent of a household’s hot water requirement annually. The typical cost for installation ranges from 500-1500 pounds for a DIY system, all the way through to 2-5k for a professional fit.

Biomass Energy Based Systems: Historically, this has come from plants and animals, though nowadays this also includes new genetcially engineered ’energy crops’. Considering its ability to produce energy in the form of heat and electricity, this type of energy is extremely flexible. Furthermore, within the European Markets, the UK is one of the central producers of Biomass fuels. Considering all this, and the relative lack of C02 produced, makes the whole process highly green overall. Much of the UK wood crop is sustainable, in order to ensure that C02 produced during any heating process is absorbed.

A process called Short Rotation Coppice (SRC), utilising trees such as Willow and Poplar, is used to meet the demands of such ’Energy Crops’. Dry matter is also very sought after – and perennial grasses are a good source of this. Within this process also sits the lesser known Agricultural and Municipal Wastes. Agricultural Waste is commonly formed as a by-product of traditional agricultural work. Of equal importance is Municipal Waste, which comes from recycyled wood and food.

Geo-Thermal Energy Based Systems – This is primarily the heating of the Earth (mainly from the sun) and can be utilised in electricity and warm water production. In the UK, we are lucky that we can both heat and cool buildings from the ground source temperature of around 12 degrees. These heat pumps do need some power to operate; but for every one unit of energy they use, they generate four units of energy in return. Heat source pump energy can go one step further (by gaining a 100 percent return) if the energy to power them comes from items such as wind turbines or solar electrical panels.

Wind Energy: The use of wind as a source of energy has been going on for thousands of years, especially in milling grain and pumping water. However, in more recent times there’s been the option to recover the energy for its own sake – and deliver this either to a home unit or to the local power grid. The UK is considered as one of the best sources of wind generation within Europe. It is interesting to note that whilst we can produce 10 percent of our entire power requirement from wind power, at present we only produce 1 percent. Instead of producing electricity at a rate of 2-10p per kWh, we could be generating at 2p per kWh. From this, the estimation of the cost recovery period is around 6-9 months overall.

Finally, we have Hydropower; an area in which the UK does well within Europe. Having said that, the art of using energy from moving water (just like wind power) is very traditional. In total, this could produce something like 2 percent of all electricity required in the UK.

By using a turbine, a Hydropower system can transfer the kinetic energy of moving water into another form. By using a dam or a natural river drop, these turbines do not require water storage. ’Micro-Hydro’ however, uses the dam and sluice systems that have been made redundant by the larger national distributions. Although a lesser known form of electricity output, this process could supply 200mW of UK demand. A micro-hydro system like this would be expected to cost between 200 and 3,000 pounds per kW of the energy.

The demand on ’Green Energy’ continues to develop – in light of the energy demands worldwide. The UK remains one of the main beneficiaries of this technology.

It is the drive for installations in the domestic sector that looks to favour jobs such as plumbers and electricians. With EEC and UK recognition of renewable energy getting ever-higher on the political agenda, the grants and financial aid for introduction of these systems can only increase. Gaining installation certification across these areas can only provide further opportunity and job security to anyone already in related fields or looking to retrain. To that end, it may be worth thinking about combined training. You can then get plumbing or electrical training along with green knowledge.

Copyright Scott Edwards 2009. Try CLICK HERE or Solar Energy Courses.